در این تاپیک قصد معرفی یکی از بهترین و پایدارترین رام های Galaxy S3 را دارم.
- تمامی ورژن های این رام بر پایه رام های اصلی بوده و کمترین باگ را دارند
- مصرف باتری فوق العاده پایین میباشد.
- پرفورمنس این رام بسیار بالا و کوچکترین هنگ شدنی در کار نیست.
- نصب رام به صورت Aroma Installer است و در هنگام نصب میتوان تمام قسمت ها را از جمله: لانچر, تم اس ام اس و ام ام اس, مود های مختلف مثل Crt off, برنامه ها و اَد آن ها را انتخاب کرد.
- رام دئودکس شده میباشد و میتوان از تمام قابلیت های دئودکس استفاده کنید.
- قابلیت انتخاب حداقل و حداکثر فرکانس پردازنده برای کاهش مصرف باتری و آورکلاک تا 1.8 گیگابایت.
- قابلت انتخاب دانلودینگ و ریکاوری از طریق دکمه پاور.
- رام به صورت پیش فرض روت شده و دارای Busy Box است.
نظر شخصی:
به مدت 5 ماه از این رام استفاده میکنم و بین تمامی رام های موجود برای S3, این رام حداقل مصرف باتری و بهترین کارایی را با کمترین مصرف باتری دارد.
از نصب این رام پشیمان نخواهید شد.
روش نصب رام:
- به منوی ریکاوری رفته.
- فول وایپ را انجام داده.
- رام دانلود شده را به مموری گوشی انتقال داده و اقدام به نصب فرمایید.
- بعد از نصب رام هم عملیات فول وایپ را انجام دهید. ( برای افزایش بازدهی رام )
[تنها کاربران عضو قادر به دیدن لینک میباشند.]
ویرایش توسط Mr. AnonYmouS : 17th October 2013 در ساعت 19:11
- آخرین رام ارائه شده توسط سازنده این رام با آندروید 4.1.2
- بر پایه فریمور MG6
- باگ های شناخته شده: 1: (مولتی ویندوز کار نمیکند که با نصب پج موجود این مشکل رفع خواهد شد. ) 2: (Pattern Lock فورس کلوز میشود. )
- برنامه و قابلیت های این ورژن:
کد:
Insert Boeffla Kernel in Aroma
* To tweak and configure the kernel, load the app “Boeffla-Config” from Google play store (or androidpit.com)
* Upstreamed to Linux 3.0.90 ([تنها کاربران عضو قادر به دیدن لینک میباشند.])
* Based on Samsung source code GT-I9300_JB_Opensource_Update11
* CPU “soft” overclocking to 1500 or 1600 MHz
* CPU undervolting interface
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Configurable zRam
* Configurable touch-to-wake
* Configurable touch boost frequency
* Configurable early suspend time (for screen off animations, 100ms default)
* Configurable LED for fading mode, speed and brightness
* Configurable charger rate (default increased to 1100 mA for ac charging)
* Boeffla-Sound engine V1.6.0 to unleash the power of the Galaxy S3 audio chip
* Additional governors: zzmoove 0.6 and lulzactiveq
* Governor profiles for pegasusq and zzmoove for performance, battery saving etc.
* Additional schedulers: ROW, BFQ (v6r2) and SIO
* Schedulers configurable separate for internal and external SD memory
* Hardcore speedmod sharpness fix implemented (default is off)
* Black crush fix for better balanced display
* SD card read ahead buffer configurable separate for internal and external SD memory (default increased to 256 kB)
* Ext4 File system tweaks (default to on, can be disabled)
* System Tweaks predefined supported (default is off)
* WIFI Multicast f ilter for better battery life
* Proportional rate reduction for TCP
* Wifi mac address change support
* Dynamic fsync 1.2 implemented
* Timeout for external SD card changed to improve handling of crappy SD cards
* Custom boot animation support
* Swap supported (but not recommended, use zRam instead)
* init.d support (in /system/etc/init.d – set correct permissions!)
* CIFS compiled as a module
* NFS compiled as a module
* XBox controller support as module
* exFat support switchable (switch it off if you do not need it)
* Battery monitor wakelocks reduced
* Kernel can root if required (create file “autoroot” on internal sd and reboot)
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* Disabled various debug logs and traces
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Exynos vulnerability and sudden dead issue fixed
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Compiled with Google arm 4.7 toolchain
* Internal kernel busybox version 1.21.1
Insert CRT effect to default
CRT effect are on defalut how turn off the display
Remove flash Modem on script
Script rom don t flash a new modem,remain your old modem
-->[تنها کاربران عضو قادر به دیدن لینک میباشند.]<--
-->[تنها کاربران عضو قادر به دیدن لینک میباشند.]<--
علاقه مندي ها (Bookmarks)